Length and Width
44" length x 9/16" square hammered bar, produced from tubular carbon rolled steel, net weight: 2.5 Lbs. All metal balusters come in a standard length of 44", and are designed to be cut easily on the job site. Typically they are cut from the bottom only. For information on installing, click here.
The forged iron baluster is manufactured from carbon rolled steel, which gives it a superior load bearing strength. All finishes are a powder-coated finish that are electrostatically applied and then fully cured under heat. This process ensures a finish that is harder than conventional liquid finishes. Iron balusters must pass the 4 inch spacing rule. A 4" sphere cannot pass through any portion of the balustrade or baluster portion of your staircase. For more details, check this out.
Be the first to review this product.
- 2.50 LBS
- Calculated at Checkout